0-How to secure your computer and surf fully #anonymous BLACK-HAT STYLE



Share by MasterPirate™ ✔

This is a guide with which even a total noob can get high class security for his
system and complete anonymity online. But its not only for noobs, it contains a
lot of tips most people will find pretty helpfull. It is explained so detailed
even the biggest noobs can do it^^ :

=== The Ultimate Guide for Anonymous and Secure Internet Usage v1.0.1 ===

Table of Contents:

1. Obtaining Tor Browser
2. Using and Testing Tor Browser for the first time
3. Securing Your Hard Drive
4. Setting up TrueCrypt, Encrypted Hidden Volumes
5. Testing TrueCrypt Volumes
6. Securing your Hard Disk
7. Temporarily Securing Your Disk, Shredding Free Space
8. Installing VirtualBox
9. Installing a Firewall
10. Firewall Configuration
11. Installing Ubuntu
12. Ubuntu Initial Setup
13. Installing Guest Additions
14. Installing IRC (Optional)
15. Installing Torchat (Optional)
16. Creating TOR-Only Internet Environment
17. General Daily Usage

By the time you are finished reading and implementing this guide, you will be
able to securely and anonymously browse any website and to do so anonymously. No
one not even your ISP or a government agent will be able to see what you are
doing online. If privacy and anonymity is important to you, then you owe it to
yourself to follow the instructions that are presented here.

In order to prepare this guide for you, I have used a computer that is running
Windows Vista. This guide will work equally well for other versions of Windows.
If you use a different operating system, you may need to have someone fluent in
that operating system guide you through this process. However, most parts of the
process are easily duplicated in other operating systems.

I have written this guide to be as newbie friendly as possible. Every step is
fully detailed and explained. I have tried to keep instructions explicit as
possible. This way, so long as you patiently follow each step, you will be just

In this guide from time to time you will be instructed to go to certain URLs to
download files. You do NOT need TOR to get these files, and using TOR (while
possible) will make these downloads very slow.

This guide may appear overwhelming. Every single step is explained thoroughly
and it is just a matter of following along until you are done. Once you are
finished, you will have a very secure setup and it will be well worth the
effort. Even though the guide appears huge, this whole process should take at
the most a few hours. You can finish it in phases over the course of several

It is highly recommended that you close *ALL* applications running on your
computer before starting.

Next:1 : Obtaining Tor Browser

=== 1 : Obtaining Tor Browser ===

The first step to becoming secure and anonymous online is to setup and install
something called "TOR". "TOR" is short for "The Onion Router". The concepts
behind TOR were first implemented by the United States Military, and these
principles have been used to create an extremely secure mechanism for being
anonymous online. In fact, millions of people world-wide use TOR to browse the
internet and communicate anonymously.

TOR works by heavily encrypting your communications so that no observer can see
what website you are really going to, and what information is really being sent.
It all appears as a bunch of random characters to any observer. You simply use
the TOR web browser just as you use any other web browser. TOR takes care of the

However, TOR by itself is not enough. Even when using TOR, a user can be
compromised in a number of ways. First, some websites can be set up to attempt
to reveal someone's true IP address (their true identity) by tricking their web
browser or other software to transmitting that information. For this reason,
anyone who uses TOR will recommend that no one have javascript or flash turned
on while browsing TOR. In this guide however, I will show you a much better

The second issue is that of human error. Even if you have TOR installed, you may
accidentally forget which browser to put in a link. You may also accidentally
click on a link from another program, such as a chat program. That program might
then load the link you clicked on into a non-TOR browser. When you are using
TOR, you must be careful *constantly* that every link goes into the right
browser, and that you do not accidentally click the wrong link.

So then, let's begin. Obtaining the TOR Browser is easy. Simply go to the
following website:


Once here, you may feel free to read more about what TOR is and how it works, or
you may proceed to immediately download TOR.

Here is how to do so:

1. Click on "Download TOR", or "Download".

2. You will see text that says, "The Tor Browser Bundle contains everything you
ned ... Just extract it and run. Learn more >>

3. Click on this "Learn more" link. for the "Tor Browser Bundle"

4. Assuming you are an English speaker, you would choose the top-most link
"English (en-US)". Otherwise, pick the language best suited to you.

5. The file being saved will be named: tor-browser-1.3.18_en-US.exe

It is ok if the number is not exactly 1.3.18, there are new versions of Tor from
time to time. At the time that this guidewas written, 1.3.18 was most current.
By the time you are reading this, a more current version of TOR may exist.

6. Run this file.

7. You will be prompted to extract this to a directory. By default, it will be
set to C:UsersYouDownloads This is perfectly ok. You can also choose a different
directory if you wish.

8. Click "Extract"

That's it. TOR Browser is NOW installed. Time to test it out!

Next 2 : Using and Testing Tor Browser for the first time ===

=== 2 : Using and Testing Tor Browser for the first time ===

Now you have successfully downloaded and installed the Tor Web Browser Bundle.
You are no doubt anxious to begin using it. First, click on the "start" menu
icon, the icon in the lower left of your screen with the windows logo. On the
top right will be a listing that says "You", "Documents", "Pictures", "Music"...
"You" of course will be replaced by your user name. Click on "You", the top most
link. This will open up your main user folder.

Now, locate the folder called "Downloads" and double click on it.

Now, inside the "Downloads" folder, double click on the folder called "Tor

Lastly, double click on the application: "Start Tor Browser"

When you do, you will see the Vidalia Control Panel appear, and you will observe
as you connect to the TOR network. When this is complete, your web browser will
open up and will automatically connect to the web address: check.torproject.org

This is to confirm that you are in fact using TOR. If you have followed this
guide correctly, then you will see the following green text, or something

"Congratulations. Your browser is configured to use Tor."

Now you can use this web browser the same as any other. You can go to any
website you wish, and neither your ISP or anyone else will be able to see where
you are going, or what you are doing. However, there are still issues that need
to be resolved, so don't begin browsing just yet.

If you fill out a form containing your email address, your name, or any other
sensitive information while using the TOR browser, be aware that sometimes it is
possible for an observer to see that information. When using TOR, use it to
access websites and content that you are *not* connected to via your real
identity or any username or nick name which links to your real identity. Let TOR
be for anonymous browsing solely. Do your online banking, or any other
activities involving your real identity using your normal web browser.

Next: 3 : Securing Your Hard Drive ===

=== 3 : Securing Your Hard Drive ===

Being able to browse anonymously is one thing. However, you may choose to
download and save sensitive content or material to your computer which you wish
to keep private. This may include reading sensitive documents, viewing pictures,
or storing any kind of sensitive data.

If you save *anything* to your computer's harddrive, then it is possible for
someone who has confiscated your computer to determine what it was you saved.
This is often true even if you delete the content. For example, suppose I use
the Tor Browser and I navigate to a website containing a sensitive document that
I wish to read. If I saved that document somewhere on my harddrive, then it is
possible for someone else to find it. If I *delete* that document, it may still
be possible for someone to undelete it.

Further, even if I never save it to my harddrive but I simply look at it using
my word processing software, it may still be saved in a number of ways

1. Often programs keep records of filenames. The filename alone is often enough
to incriminate someone.

2. Often programs keep parts of the content viewed saved for various reasons,
such as for searching. This can include random excerpts of text, thumbnails of
images, and more. Often this "partial" data is more than enough to prove what
the original data was. Often  the "partial" data is itself incriminating.

3. Sometimes, especially if you are running low on system memory, your operating
system may choose to use your hard-disk as a temporary RAM. This is known as
"SWAP". Normally, whenever you turn off your computer, whatever was in RAM is
deleted. However, the data that goes to your SWAP may persist and it may be
possible for someone to see what content you had open in your programs if that
information is saved in RAM.

Generally speaking, you *must* have a plan to secure any content that is saved
to your hard disk. Therefore, this guide would be incomplete if we did not
thoroughly address this. First, there are two kinds of such content:

1. Deliberately saved content.
2. Inadvertently saved content.

Deliberately saved content refers to content that you have chosen to save on
your harddisk so that you can access this content later. We will
address how to do this later in the guide.

Inadvertently saved content refers to content that is saved by programs you use,
or your operating system. You have no way to even know what this content might
be. Therefore, this is the most dangerous. You may browse and find a dozen
sensitive documents, utterly delete them, and some program may have saved the
file names and excerpts of the data. This will render your previous efforts

Content that is inadvertently saved to your harddisk comes in two flavors:

1. Content that is saved to your SWAP space.

2. Content that is saved by applications running on your computer, including
your operating system.

The surest way to prevent content from writing to your SWAP space is to disable
your SWAP space altogether. This may result in your computer
running a bit slower than normal, and may mean that you cannot use ram intensive
games and applications during the time your SWAP is disabled.

Therefore, if you use this method, simply turn back on the SWAP when you want to
use those ram intensive applications. Also, you may choose not
to take this step.

1 - Here is how to disable your swap space if you are using Windows 7:


*This step is recommended for advanced users only. If you are not comfortable
doing this, you may safely skip this step.*

Instructions are less verbose than usual, as these steps are intended for
advanced users only. If you do not fully understand these instructions, skip
this step.

1. From Control Panel, go to "System and Security".

2. Click on "System", and then choose "Advanced system settings" in the
left-most menu.

3. Under the "Advanced" tab, under "Performance", click "Settings".

4. Under this "Advanced" tab, under "Virtual Memory", click "Change".

5. Uncheck "Automatically manage paging file sizes for all drives".

6. Select "No paging file".

7. Save, reboot, and follow these same first 5 steps to confirm that "No paging
file" is still selected. This means that you have successfully disabled your
swap. This means that *nothing* from RAM will be inadvertently saved to your

To resume using SWAP again, simply click "Automatically manage paging file size
for all drives." You can switch between these two modes as you desire.

Generally speaking, your computer will run fine without a swap file, provided
you have enough RAM.


The next issue we need to address is how to prevent applications and/or your
operating system from saving content inadvertently that you do not want
saved. For this, we are going to set up a "Virtual Machine".

A "Virtual Machine" is like a computer inside of your computer. Everything you
do inside the Virtual Machine (vm for short) will be fully contained within
itself and no one will be able to see what the vm has been doing. Ideally, you
want *ALL* of your sensitive computer usage of any kind, TOR or NON TOR, to take
place within a vm. In this way, you can keep everything private that you wish
while still using your computer fully and getting the most out of it.

Don't be afraid of this sounds complicated. This guide will take you through
every step slowly and methodically. Before we can set up a vm however, we need
to take another step.

Next: 4 : Setting up TrueCrypt, Encrypted Hidden Volumes ===

=== 4 : Setting up TrueCrypt, Encrypted Hidden Volumes ===

If you save anything on your computer, it is likely that you do not want just
anyone to be able to see what you have saved. You want a way to protect that
information so that you can access it, and absolutely no one else except those
you trust. Therefore, it makes sense to set up a system which protects your
information and safeguards it against prying eyes.

The best such system for this is called "True Crypt". "True Crypt" is an
encryption software program which allows you to store many files and directories
inside of a single file on your harddrive. Further, this file is encrypted and
no one can actually see what you have saved there unless they know your

This sounds extremely high tech, but it is actually very easy to set up. We are
going to do so, right now:

1. Go to http://www.truecrypt.org/downloads (or go to http://www.truecrypt.org,
and click on "Downloads")
2. Under "Latest Stable Version", under "Windows 7/Vista/XP/2000", click
3. The file will be called "True Crypt Setup 7.0a.exe" or something similar. Run
this file.
4. If prompted that a program needs your permission to continue, click
5. Check "I accept and agree to be bound by these license terms"
6. Click "Accept"
7. Ensure that "Install" is selected, and click "Next"
8. click "Install"
9. You will see a dialog stating "TrueCrypt has been successfully installed."
Click "Ok"
10. Click "No" when asked if you wish to view the tutorial/user's guide.
11. Click "Finish"

At this point, TrueCrypt is now installed. Now we will set up truecrypt so that
we can begin using it to store sensitive information.

1. Click the "Windows Logo"/"Start" button on the lower left corner of your
2. Click "All Programs"
3. Click "TrueCrypt"
4. Click the "TrueCrypt" application

And now we can begin:

1. click the button "Create Volume"
2. Ensuring that "Create an encrypted file container" is selected, click "Next"
3. Select "Hidden TrueCrypt volume" and click "Next".
4. Ensuring that "Normal mode" is selected, click "Next"
5. Click on "Select File"

Note which directory you are in on your computer. Look at the top of the dialog
that has opened and you will see the path you are in, most likely the home
directory for your username. An input box is provided with a flashing cursor
asking you to type in a file name. Here, you will type in the following


You may of course replace random.txt with anything you like. This file is going
to be created and will be used to store many other files inside.
Do NOT use a filename for a file that already exists. The idea here is that you
are creating an entirely new file.

It is also recommended though not required that you "hide" this file somewhere
less obvious. If it is in your home directory, then someone who has
access to your computer may find it easier. You can also choose to put this file
on any other media, it doesn't have to be your hard disk. You could for example
save your truecrypt file to a usb flash drive, an sd card, or some other media.
It is up to you.

6. Once you have typed in the file name, click "Save"
7. Make sure "Never save history" is checked.
8. Click "Next"
9. On the "Outer Volume" screen, click "Next" again.
10. The default Encryption Algorithm and Hash Algorithm are fine. Click "Next"
11. Choose a file size.

In order to benefit the most from this guide, you should have at least 10
gigabytes of free disk space. If not, then it is worth it for you to purchase
some form of media (such as a removable harddrive, a large sd card, etc.) in
order to proceed. TrueCrypt can be used on all forms of digital media not just
your hard disk. If you choose to proceed without obtaining at least ten
gigabytes of disk space, then select a size that you are comfortable with
(such as 100 MB).

Ideally, you want to choose enough space to work with. I recommend 20 GB at
least. Remember that if you do need more space later, you can always create
additional TrueCrypt volumes using exactly these same steps.

12. Now you are prompted for a password. THIS IS VERY IMPORTANT. READ THIS


*** The password you choose here is a decoy password. That means, this is the
password you would give to someone under duress. Suppose that someone suspects
*** that you were accessing sensitive information and they threaten to beat you
or worse if you do not reveal the password. THIS is the password that you  ***
give to them. When you give someone this password, it will be nearly impossible
for them to prove that it is not the RIGHT password. Further, they cannot ***
even know that there is a second password.

Here are some tips for your password:

A. Choose a password you will NEVER forget. It may be ten years from now that
you need it. Make it simple, like your birthday repeated three times.
B. Make sure it seems reasonable, that it appears to be a real password. If the
password is something stupid like "123" then they may not believe you.
C. Remember that this is a password that you would give to someone if forced. It
is *NOT* your actual password.
D. Do not make this password too similar to what you plan to really use. You do
not want someone to guess your main password from this one.

And with all of this in mind, choose your password. When you have typed it in
twice, click "Next".

13. "Large Files", here you are asked whether or not you plan to store files
larger than 4 GIGABYTES. Choose "No" and click "Next"
14. "Outer Volume Format", here you will notice some random numbers and letters
next to where it says "Random Pool". Go ahead and move your mouse around for a
bit. This will increase the randomness and give you better encryption. After
about ten seconds of this, click "Format".
15. Depending on the file size you selected, it will take some time to finish

"What is happening?"

TrueCrypt is creating the file you asked it to, such as "random.txt". It is
building a file system contained entirely within that one file. This file system
can be used to store files, directories, and more. Further, it is encrypting
this file system in such a way that without the right password it will be
impossible for anyone to access it. To *anyone* other than you, this file will
appear to be just a mess of random characters. No one will even know that
it is a truecrypt volume.

16. "Outer Volume Contents", click on the button called, "Open Outer Volume"

An empty folder has opened up. This is empty because you have yet to put any
files into your truecrypt volume.


This is the "Decoy". This is what someone would see if you gave them the
password you used in the previous step. This is NOT where you are going to store
your sensitive data. If you have been forced into a situation where you had to
reveal your password to some individual, then that individual will see whatever
is in this folder. You need to have data in this folder that appears to be
sensitive enough to be protected by truecrypt in order to fool them. Here are
some important tips to keep in mind:

A. Do NOT use porn. Adult models can sometimes appear to be underaged, and this
can cause you to incriminate yourself unintentionally.
B. Do NOT use drawings/renderings /writings of porn. In many jurisdictions,
these are just as illegal as photographs.
C. Good choices for what to put here include: backups of documents, emails,
financial documents, etc.
D. Once you have placed files into this folder, *NEVER* place any more files in
the future. Doing so may damage your hidden content.

Generally, you want to store innocent data where some individual looking at it
would find no cause against you, and yet at the same time they would understand
why you used TrueCrypt to secure that data.

Now, go ahead and find files and store them in this folder. Be sure that you
leave at least ten gigabytes free. The more the better.

When you are all done copying files into this folder, close the folder by
clicking the "x" in the top right corner.

17. click "Next"

18. If prompted that "A program needs your permission to continue", click
19. "Hidden Volume", click "Next"
20. The default encryption and hash algorithms are fine, click "Next"
21. "Hidden Volume Size", the maximum available space is indicated in bold below
the text box. Round down to the nearest full unit. For example, if 19.97 GB is
available, select 19 GB. If 12.0 GB are available, select 11 GB.
22. If a warning dialog comes up, asking "Are you sure you wish to continue",
select "Yes"
23. "Hidden Volume Password"


Here you are going to select the REAL password. This is the password you will
NEVER reveal to ANYONE else under any circumstances. Only you will know it. No
one will be able to figure it out or even know that there is a second password.
Be aware that an individual intent on obtaining your sensitive information may
lie to you and claim to be able to figure this out. They cannot.

It is HIGHLY recommended that you choose a 64 character password here. If it is
difficult to remember a 64 character password, choose an 8 character password
and simply repeat it 8 times. A date naturally has exactly 8 numbers, and a
significant date in your life repeated 8 times would do just fine.

24. Type in your password twice, and click "Next"
25. "Large Files", select "Yes" and click "Next".
26. "Hidden Volume Format", as before move your mouse around for about ten
seconds randomly, and tehn click "Format".
27. If prompted "A program needs your permission to continue", select "Continue"
28. A dialog will come up telling you that the hidden TrueCrypt volume has been
successfully created. Click "Ok"
29. Click "Exit"

Congratulations! You have just set up an encrypted file container on your hard
drive. Anything you store here will be inaccessible to anyone except you.
Further, you have protected this content with TWO passwords. One that you will
give to someone under threat, and one that only you will know. Keep your real
password well protected and never write it down or give it to anyone else for
any reason.

Now, we should test BOTH passwords.

Next:5. Testing TrueCrypt Volumes ===

=== 5. Testing TrueCrypt Volumes ===

Once you have completed the above section, you will be back at TrueCrypt. Go
ahead and follow these steps to test the volumes you have made.

1. Click "Select File..."
2. Locate the file you created in the last section, most likely called
"random.txt" or something similar. Remember that even though there is both an
outer and
a hidden volume, both volumes are contained in a single file. There are not two
files, only one.
3. Click "Open"
4. Choose a drive letter that you are not using (anything past M is probably
just fine). Click on that, For example click on "O:" to highlight it.
5. Click "Mount"
6. Now you are prompted for a password. Read the below carefully:

The password you provide here will determine WHICH volume is mounted to the
drive letter you specified. If you type in your decoy password, then O: will
show all the files and directories you copied that you would reveal if forced.
If you type in your real password, then O: will show the files and directories
that you never intend anyone to see.

7. After successfully typing in your password, you will see additional detail to
the right of the drive letter, including the full path to the file you selected
as well as the kind of volume it is (for example, hidden).
8. Right click on your "Windows Logo"/"Start Menu" icon, and scroll down to the
bottom where you can see your different drive letters. You will see the drive
letter you selected, for example: "Local Disk (O:)". Click on that.
9. If you selected your decoy password, you will see all the files and folders
that you moved there during the installation phase. If you selected the real
password, you will see whatever files and directories you have placed so far
into the hidden volume, if any.

If you selected your hidden volume password, you may now begin moving any
sensitive information you wish. Be aware that simply moving it from your main
hard disk is not enough. We will discuss how to ensure deleted data is actually
deleted later in the guide.

"What is happening?"

When you select a file and mount it to a drive, you are telling your computer
that you have a new drive with files and folders on it. It is the same thing as
you had plugged in a usb flash drive, a removable harddrive, or an sd card into
your computer. TrueCrypt causes your computer to think that there is an
entirely new disk drive on your computer. You can use this disk drive just as if
it *was* actually a usb flash drive. You can copy files to it, directories, and
use it just as you would use a usb flash drive.

When you are done, simply close all open windows/folders/applications that are
using your truecrypt drive letter, and then click "Dismount" from within
TrueCrypt while you have the drive letter highlighted. This will once again hide
all of this data, accessible only by re-mounting it with the correct password.


When a true crypt hidden volume is mounted, someone who has access to your
computer can access anything that is inside that hidden volume. If for example
you left your computer running while a truecrypt volume was mounted, then if
someone gained access to your computer they would be able to see everything you
have in that volume. Therefore:


You can tell that it is dismounted because the drive letter inside of
"TrueCrypt"'s control panel will appear the same as all of the other drive
letters, with no information to the right of the drive letter.

You should practice Mounting and Dismounting a few times with both passwords to
make sure you understand this process.

Once you have copied files/folders into the hidden volume, do *NOT* touch the
files or folders in the outer volume anymore. Remember that both volumes occupy
the same single file, and therefore changing the outer volume can damage the
hidden volume. Once you have copied files/folders into the outer volume during
the installation process, that is the last time you should do so. From that
point forward, use ONLY the hidden volume. The outer volume exists only as a
decoy if you need it.

Next:6. Securing your Disk ===

=== 6. Securing your Disk ===

This is an involved step which many people may not be able to do right away. If
you cannot do this step immediately, then see section 7.

At this point you should understand how to create and use TrueCrypt hidden
volumes in order to safeguard any sensitive information. Therefore, you should
*NOT* keep any such sensitive information on your hard disk.

At this stage, there are two possibilities:

1. You have never had any sensitive information on your hard disk. In this case,
read this section but you can certainly skip it.
2. Up until now, you have stored sensitive information on your hard disk. If so,
then you MUST read this section.

If you have ever used this computer to access sensitive information, then all of
the security and precautions in the world are totally useless and futile because
all someone has to do is access what is left of that sensitive information. I
cannot stress this enough.

You can have the most secure TrueCrypt volumes, use TOR, and be the safest most
secure user in the world. If you have not made sure that *ALL* remnants of any
sensitive information are UTTERLY REMOVED from your hard disk, then all of that
effort is totally pointless. You MUST take these actions to safeguard your hard
disk, or otherwise you might as well throw away this guide and follow none of
the advice herein.

First, I understand that it is troublesome to have to re-format a computer, to
back everything up, and reinstall everything. However, if you have ever had
sensitive information on your machine, that is what you have to do. Take the
following steps:

1. Obtain a removable harddrive or usb flash drive large enough to store
anything you need to save.
2. Set up a truecrypt hidden volume on that harddrive big enough to hold all of
that information.
3. Set up the truecrypt outer volume as in the previous section. Use the
previous section as a guide if you need to.
4. Be sure you the hidden volume will have enough space to store all that you
are backing up.
5. Copy ALL data you need to back up/save into that hidden volume.


If you have ever used this system to access sensitive information, then you must
assume that the sensitive information or remnants of it can be *anywhere* on
your hard disk. Therefore, you need to move *EVERYTHING* you intend to save into
the hidden truecrypt container. You do not know where sensitive data might be,
so you are assuming it can be anywhere. This way you still have ALL of your data
and you have lost nothing.

A good analogy is toxic waste. You don't know which barrel might contain the
toxic waste, so you treat *ALL* the barrels as potentially toxic. This is the
surest way you can protect yourself.

You might be saying, "I have family photos, music, movies that I would have to
move to the hidden volume." That is perfectly fine. Remember that you can access
that hidden volume just as if it was a drive letter. In fact, ideally, *ALL* of
the content on your computer (assuming you value your privacy) should be 
protected anyways. You lose nothing by securing all of that data.

6. Once you have copied everything you intend to copy. dismount your hidden
volume, reboot your computer, and re-mount your hidden volume to make sure
everything is there.
7. Now it is time to re-format your entire hard drive. Re-install your operating
system of choice (such as Windows 7), and start with a clean slate.
8. Once you have reinstalled your operating system from scratch, follow sections
one through five of this guide to reach this point, and then proceed.

Next:7. Temporarily Securing Your Disk, Shredding Free Space ===

=== 7. Temporarily Securing Your Disk, Shredding Free Space ===

Like the previous section, this section applies ONLY IF there is some risk that
sensitive data has ever been stored or accessed on this computer. If you are
100% sure that sensitive information has never been accessed using this
computer, then you can safely skip this and the previous step.

If you are not prepared to take the actions in the previous step yet, then you
should follow the steps in this section until you can. However, you MUST
eventually take the actions in step six above. Do not assume you can find/delete
all sensitive content. Lists of filenames, image thumbnails, random
data, and more *ARE* sitting on your hard disk. Someone who knows how to find
it, WILL. That will render all of your other precautions totally futile.

As soon as you can, follow the instructions in step six.

Meanwhile, here is how you can temporarily safeguard yourself until you are able
to follow those instructions.

1. Go through your hard disk folder by folder, deleting (or moving to a
truecrypt hidden volume) any files that you believe are sensitive/risky.

2. When you are totally sure that you have deleted all such files, go to the
following URL: http://www.fileshredder.org

3. Scroll down and look for the button called "Download File Shredder" -- do NOT
click any other button, as the page may have ads on it that appear to be
download links.

4. Save the file.

5. Run the file, most likely titled: file_shredder_setup.exe

6. "Welcome to the File Shredder Setup Wizard", Click "Next"

7. Select "I accept the agreement" and click "Next"

8. It will choose where to install it, click "Next"

9. Click "Next" again when prompted for the Start Menu folder.

10. "Select Additional Tasks", Click "Next" again

11. Click "Install"

12. Ensuring that "Launch File Shredder" is checked, click "Finish"

13. You should now notice that "File Shredder" is running. You should see the
program in your task bar. Click on it to bring up the control panel if it is not
up already.

14. On the left is a link that says "Shred Free Disk Space", click it.

15. Choose the drive letter for your hard disk, typically C:, as well as any
other drives you wish to shred the free space.

16. under "Select Secure Algorithm", select "Secure Erasing Algorithm with 7
passes" and click "Next"

17. Click "Start"

This will take some time to finish. Once you have finished shredding your free
disk space, it will be impossible or nearly impossible for someone to find one
of your deleted files and piece it back together to see what it once was.
However, this is NOT enough.

Keep in mind that there may still be records of the filenames that were deleted,
partial data from those files, image thumbnails, and more that may be enough to
incriminate you. This is only a temporary step you have taken, and you
absolutely must take the actions in step 6 above in order to be truly safe.

Next:8. Installing VirtualBox

=== 8. Installing VirtualBox

And now we get to the fun part. We are going to create a secure environment for
you to browse the internet and communicate in a way that is totally anonymous
and untraceable. You will have a setup that is so secure as to be virtually
impossible to break.

1. First, go to the following URL: http://www.virtualbox.org

2. Select "Downloads" in the menu on the left.

3. Under "VirtualBox platform packages" is "VirtualBox 4.0.4 for Windows Hosts",
next to that is "x86/amd64". Click that.

4. Save the file. It should be titled similar to: "VirtualBox-4.0.4-7011-Win.exe

5. Run the file.

6. "Welcome to the Oracle VM... Setup Wizard", Click "Next"

7. click "Next"

8. Click "Next"

9. "Warning: Network Interfaces", click "Yes" but be aware that your internet
connection will be temporarily reset for a few seconds.

10. Click "Install"

11. A dialog saying "A program needs your permission to continue" may appear,
click "Continue".

12. One or more dialogs asking if you want to install "device software" may come
up, select "Install" each time.

13. Optionally check the box "Always trust software from Oracle Corporation."

14. "Oracle VM... installation is complete", Click "Finish" ensuring that "Start
Oracle VM after installation" is checked.

Now we have the software we need in order to set up and run virtual machines. On
your task bar to the far right, you should notice VirtualBox running. Click on
the "VirtualBox" icon if needed in order to bring the VirtualBox control panel
into view.

Now it is time to set up a virtual machine. For this, we need to obtain two
files. Operating systems, such as windows, are typically installed using a cd or
dvd. You put the cd or dvd into your computer, you boot it up, and you follow
the instructions in order to install the operating system. Virtual machines
work similarly. Before we can use a virtual machine, we have to install an
operating system on it.

However, we are *NOT* going to use Windows! We are going to use Linux. Do not be
afraid if you have no experience using Linux. I assure you that this will prove
to be painless. We actually need two different linux operating systems in order
to have a secure system. Before we go through the steps of setting this up, I
want to describe to you what we are doing.

Remember earlier in the guide I explained that one of the downsides to using Tor
Browser from your main computer is that you might accidentally put a link into a
non-Tor browser. The problem with your computer right now is that you can access
tor sites, or non-tor sites equally well. That means that you have to be
extremely careful to ensure that you are using Tor.

An analogy would be to say that you are typing on a keyboard with red and green
keys. You have to be careful to only hit the green keys. If you accidentally hit
a red key, then you could compromise your security and anonymity. That is *not*
a good position to be in. The purpose of setting up a virtual machine is to make
certain that you cannot accidentally reveal your identity or compromise your

The computer you are using now has two ways of accessing the internet: TOR, and
Non-TOR. The virtualmachine we are setting up however will only be able to
access the internet using TOR. No other way period. That means that no matter
what you do, no matter how hard you try, you will NOT be able to accidentally
access any website except through TOR. This *guarantees* that whatever you do on
that virtual machine is going to be through TOR.

So how do we achieve this? There are a number of ways to do so. The method
presented in this guide is not the only good way, however I do believe that it
is both easy to set up and also friendly to users who may not have a great deal
of RAM.

First, we are going to set up two different virtual machines. One of them will
exist for the sole purpose of making sure that the other one does not
accidentally connect to the internet except through TOR. This virtual machine
requires very little. You will not be using it for anything. It will simply act
as a gatekeeper to ensure that the other Virtual Machine is safe.

The second virtual machine will be what you use for internet browsing, chatting,
etc. This virtual machine will be configured in such a way that it can only use
TOR and nothing else. The way we will achieve this is to force this second
virtual machine to go through the first virtual machine for all internet

Do not worry if this seems complicated. As with the rest of this guide, I am
going to walk you through step by step exactly what to do.

First, we have to obtain the operating systems we will need. In this case, we
are going to use "Damn Small Linux" (yes that is it's real name) for the
firewall and we are going to use "Ubuntu" for the main system. The advantage to
using "Damn Small Linux" is that we only need 32 MB of ram and no disk sapce to
have an effective firewall.

Let's set up the firewall first:

Next:9. Installing a Firewall ===

=== 9. Installing a Firewall ===

1. First, go to the following URL: http://www.damnsmalllinux.org (three l's)
2. Scroll down until you see a link that says "Download"
3. Under "Current Full Mirror List", click any that work. Some may not work at
any given time. If one doesn't work, simply hit back on your browser and try
another one.
4. At the time of this guide, the following url worked:
5. Go to the "current" directory if not already in it.
6. Click on the file called: dsl-4.4.10.iso -- If you cannot find this file,
choose the file closet to it. A higher version number is fine. The file will
probably be about 50 MB
7. The file should take about 5-10 minutes to download based on your connection.


(If you had trouble with the above steps, read this mini-section)
(With mirrors, it is often the case that a particular mirror site doesn't work.
At the time of this writing, several mirrors worked. I am providing detailed
instructions for each mirror.)
(Above I have already provided instructions for the mirror)

MIRROR: http://gd.tuwien.ac.at/opsys/linux/damnsmall
(Go to this URL, and under "Subdirectories" click on "current") if available,
select the file called "current.iso" (provided the file is at least 49 MB in
size) If not, then choose the closest file to dsl-4.4.10.iso, a higher version #
is fine.

MIRROR: http://ftp.belnet.be/packages/damnsmalllinux/
(go to "current" directory, obtain either "current.iso" (if 49 MB or higher) or
find file closest to "dsl-4.4.10.iso")

MIRROR: http://ftp.heanet.ie/mirrors/damnsmalllinux.org/
(go to "current" directory, obtain either "current.iso" (if 49 MB or higher) or
find file closest to "dsl-4.4.10.iso")

At this point, you should have the file either "current.iso" or "dsl-4.4.10.iso"
(or something similar) fully downloaded and saved into your Downloads directory.

Now, go ahead and open up VirtualBox again, most likely by clicking it on the
task bar.

8. Click "New" at the top left, an icon that resembles a many-pointed round
9. "Welcome to the New Virtual Machine Wizard", click "Next"
10. "VM Name and OS Type": Under "Name" type in: Firewall
11. For Operating System, choose "Linux"
12. For "Version", choose: "Other Linux"
13. Click "Next"
14. "Memory", select "32 MB" and click Next
15. "Virtual Hard Disk", Uncheck "Boot Hard Disk" and click "Next"
16. If a Warning dialog appears, click "Continue"
17. Click "Finish"
18. Now you will notice "Firewall, Powered Off" visible in your VirtualBox
control panel. Make sure it is highlighted (it should be) and then right click
it, and select "Settings".
19. Select "Network" in the menu to the left.
20. Click on the "Adapter 2" tab.
21. Check "Enable Network Adapter" and next to where it says "Attached to",
select "Internal Network" from the pulldown menu.
22. Click "Ok" at the bottom.
23. Once again, right click "Firewall, Powered Off" and select "Start"
24. Check "Do not show this message again" and click "Ok". This is just letting
you know that the "RIGHT CTRL KEY" on your keyboard is the "control" key for
this virtual machine.
25. "Welcome to the First Run Wizard", click "Next"
26. "Select Installation Media", under "Media Source" is a pull down menu. To
the immediate right of that pull down menu is an icon with a folder. Click that
folder icon.
27. Locate "current.iso" or "dsl-4.4.10.iso" (or the similar file name) that you
downloaded. When located, click "Open". It is likely in the "Downloads"
directory of your home folder.
28. Click "Next"
29. Click "Finish"

Now the virtual machine will start to boot up. Simply wait... (This may take up
to 5 minutes.)

30. One or more new dialogs may come up saying "VirtualBox Information", just
click "Do not show this message again" and click "Ok"

After a few minutes, the booting will finish and you will be looking at the
desktop for your firewall virtual machine. To the right of the window you will
see some stats that look something like this:

Up: 0 k/s - Down: 0 k/s
Processes: 19
CPU Usage: 10%
RAM Usage: 16.2MB/28.8MB


Congratulations! You now have a firewall running. Now we will set up this
firewall to protect you so that you can safely use TOR from your main virtual

Next:10. Firewall Configuration ===
=== 10. Firewall Configuration ===

At this stage you should be looking at the desktop for "DSL" (Damn Small Linux).

I need to talk about the mouse first. This particular virtual machine as well as
your main operating system (windows) both want control of your mouse. Both
cannot have control of your mouse at the same time however. Therefore, you have
to choose whether the mouse will be used by your virtual machine, or by Windows.
When you click into your virtual machine, it has the effect of passing control
of the mouse to the virtual machine. That means you cannot move your mouse
cursor past the boundaries of that virtual machine. In order to give mouse
control back to windows, enabling you to move your mouse cursor anywhere, simply
press the right ctrl key on your keyboard. That is to say, you have two ctrl
keys. One on the left of your keyboard, and one on the right. Press the ctrl key
that is on the right of your keyboard. This will give mouse control back to

Practice this a bit. Practice clicking into the window, moving the mouse cursor
around, pressing right ctrl, and moving the windows mouse cursor around. Get the
feel of it.

You should see a window that looks something like a web browser, with some text
in it including words such as "Getting Started with DSL". First, close that

(If your mouse is not working, read this mini-section.)

(First, click inside the window that your virtual machine is running in). Now
try moving your mouse cursor. If you do not see the mouse cursor moving around,
then press (RIGHT CTRL + I). Now move your mouse cursor again. If you notice
that you are moving your "main" mouse cursor over the window, but you do not see
the "DSL" black mouse cursor moving, then click again into that window. If you
do this a few times, you should notice that the mouse begins to work. You may
have to press RIGHT CTRL+I a couple of times to get the mouse to work.

1. Once the mouse is working inside of your virtual machine, go ahead and close
the window entitled "Getting Started with DSL"

(If you cannot see the full virtual machine window, for example because your
screen resolution is set so that some of the window goes too low, read this

(First, press RIGHT CTRL+I until you have your main windows white mouse cursor
back). Now, click on "Machine" in the menu at the top of the window.
(Select "Switch to Scale Mode")

( Click "Switch")

(Now you will have converted your firewall window to a smaller size, and you
will be able to resize it. You may need to press "right ctrl" to get a windows
mouse cursor (which you will need in order to resize this window). Now simply
resize it to the size that works for you, and then click into the window to be
able to use the black mouse cursor inside the virtual machine. I recommend you
maximize this window to make sure you can read everything clearly.

2. Right click anywhere on the desktop, go to System (a red folder), go to
Daemons, ssh, and start.

3. Right click again anywhere on the desktop, go to XShells -> Root Access ->

4. Now you have a window that you can type in. Type exactly as shown below into
this window, and hit enter:


Once you type this and hit enter, it will ask you for a password. This is a
password for full access to the firewall. Make it at least 8 characters in size.

*** IMPORTANT: Do not forget your firewall password. You will need it later in
the guide. ***

When you have successfully changed your password, it will say "Password

5. Now type exactly as shown below, into the same window:

ifconfig eth1

6. It will not say anything after you hit enter, it will just return you back to
the prompt.

Now our firewall server is ready. We want to save this state so that we can get
back to it easy in the future.

7. Now you will be looking at a window that says "Take Snapshot of Virtual
Machine". Just click "Ok"

8. Now, let's test this out to confirm it works as we expect. Go ahead and close
the virtual machine by clicking the "X" in the top right corner. A menu will
come up. Select "Power off the machine" and click ok. Do NOT check the box
called "Restore current snapshot".

And now you should be once again at the VirtualBox manager. You will see
"Firewall (Shapshot 1), Powered Off"

9. Make sure that "Firewall (Snapshot 1), Powered Off" is selected. At the top
right of your VirtualBox Manager is a button that says: "Snapshots (1)". Click

10. Click on "Snapshot 1", the top-most selection. This will highlight it.

11. Now right click it, and click on "Restore Snapshot"

12. A dialog box will come up asking if you are sure, click "Restore"

13. Now click the "Start" button at the top with the large green arrow.

14. Any dialog boxes that come up with a check box saying "Do not show this
information again", simply check the check-box, and click ok. Do not worry about
any of those.

Remember, if you do not have immediate control of the mouse inside the virtual
machine, simply press RCTRL+I (press right ctrl and "I" at the same time) and
click into it until you have mouse control.

Now your firewall is good to go. Any time you need it, just go to the VirtualBox
Manager and follow steps 9 through 14 above. You do not have to go through the
whole setup process again at any time in the future. Your firewall is ready.

Next:11. Installing Ubuntu ===

=== 11. Installing Ubuntu ===

Now we are going to set up the main machine that you will be using TOR with.

1. First, go to this URL: http://www.ubuntu.com

2. Click on the link "Download Ubuntu"

3. Click "Start Download" (This download should take 10-15 minutes)

4. The filename is going to be similar to: ubuntu-10.10-desktop-i386.iso

Now we wait...

While you are waiting for the file to download, go ahead and make sure that your
"hidden volume" is mounted in TrueCrypt to a particular drive letter. For
example, O: You will need that for the next step.

5. Return to your "VirtualBox Manager". It doesn't matter if the firewall is
running or not.

6. Click "New" (the blue round star-icon in the top left) again.

7. "Welcome to the New VirtualMachine Wizard", click "Next"

8. "VM Name and OS Type", under "Name", type "Primary"

9. Next to "Operating System", select "Linux"

10. Next to "Version", select "Ubuntu" and Click "Next"

11. "Memory", by default it selects 512 MB. This is fine. 256 MB is the MINIMUM.
The more memory you allocate, the better the virtual machine will function.
Click "Next"

12. "Virtual Hard Disk", Make sure "Boot Hard Disk" is checked. Make sure
"Create new hard disk" is selected. Click "Next"

13. "Welcome to the Create New Virtual Disk Wizard", click "Next"

14. "Hard Disk Storage Type", select "Fixed-size storage" and click "Next"

15. "Virtual Disk Location and Size", to the right of the text box containing
"Primary" is a folder icon. Click the folder icon.

16. Now we have to select a file for the new hard disk image file. On the bottom
of this dialog it says "Browse Folders", click on that.

17. Now click on "Computer" in the menu to the left.

18. Scroll to where you see the drive letter you mounted, and double click on
it. Ex: Local Disk (O:)

19. Now click "Save"

20. By default 8.00 GB are selected. That is fine. If you have enough space on
your hidden volume, increase this to 10 GB. Otherwise, 8 is fine.

21. Under "Location", it should say O:Primary.vdi where O: is replaced by
whatever drive letter you mounted your TrueCrypt hidden volume to.

22. Click "Next", then click "Finish"

Now we wait for VirtualBox to create the hard drive we asked for. This may take
a few minutes.

Keep in mind this entire virtual machine as well as any of its contents are
going to reside within the hidden truecrypt container. This ensures extra

23. When this is done, you will see a "Summary" window. Click "Finish".

24. Now, right click on "Primary, Powered Off" in your "VirtualBox Manager", and
click "Start"

25. Again we are at the "First Run Wizard", click "Next"

26. "Select Installation Media", under "Media Source" is a pull down menu. Click
the "folder icon" to the immediate right of that pulldown menu.

27. Locate "ubuntu-10.10-desktop-i386" (or the similarly named file) from your
Downloads directory, or wherever you saved it. Click on it, and click "Open"

28. Click "Next"

29. Click "Finish"

Now simply wait. Your Ubuntu virtual machine will be loading up. This may take a
few minutes. Don't worry if you see all kinds of strange messages/text. It is

After a few minutes, you should start to see the Ubuntu desktop load. Unlike
your firewall, you will notice that you do not have to click the mouse inside
the window. It automatically happens. This is going to be much easier than the
"Firewall" step.

Once everything has loaded, you will be looking at a window that says "Install"
with a button that says "Install Ubuntu". If you cannot see everything, press
RCTRL+F (to go full screen). You can return to windowed mode by RCTRL+F again.
Any dialogs can be closed, and you can check the box that says "Do not show me
this again."

30. Click "Install Ubuntu"

31. Check "Download updates while installing"

32. Check "Install this third-party software". Click "Forward"

33. Ensure "Erase and use entire disk" is selected, and click "Forward".
Remember, this is NOT talking about your hard disk. It is talking about the 8-10
gigabyte virtual disk.

34. Click "Install Now"

35. Now you will be guided through a series of installation related screens. The
first screen asks you to select your timezone/time. Select your choice and click

36. Now keyboard layout, again select your choice and click Forward. If you are
unsure, leave it as is or click "Figure out keyboard layout"

37. "Who are you?" For "Your name" type in: mainuser

38. When you type in "mainuser" the other boxes will fill in automatically. Now
click in the text box next to "Choose a password".

39. Do NOT use the same password as the firewall. Come up with a different

40. Ensure that "Require my password to log in" as well as "Encrypt my home
folder" are selected and checked and proceed.

Now simply wait until the installation is finished. The installation may take a
while, and it may appear to stall at some points. As long as the ubuntu mouse
cursor shows an animation that is turning around in circles, the installation
*is* working. Simply wait until it is done. If after an hour or two the progress
bar hasn't moved at all, then go ahead and re-start the installation starting
from step 24 (after closing the window and powering down the virtual machine).

Depending on your computer, it could take 2-4 hours. Most likely, it will take
about an hour. Once finished, you will see a dialog that says "Installation
Complete" with a button that says "Reboot Now". Do NOT press the "Reboot Now"
button. Close the 'X' on this window, and Power Down.

41. Now, right click "Primary" and go to "Settings".

42. Click on "Storage" in the left menu. Then click on the "ubuntu-10.10...
.iso" under where it says "IDE Controller"

43. To the right it says "Attributes" under that it says "CD/DVD Drive : ..." to
the immediate right of that is a cd icon. Click it.

44. Select "Remove disk from virtual drive."

45. Click "Ok"

46. Now, making sure that "Primary" is highlighted, click the "Start" button at
the top with the large green arrow.

Now we wait for your newly installed Ubuntu machine to boot up.

47. After a few minutes, you will see a dialog appear that says
"mainuser-VirtualBox". Go ahead and click on "mainuser" which has the "person
icon" to the left of it.

48. Now it will prompt you for your password. Enter the password you used in the
installation process.

49. After a minute or so, you should hear a nice login sound, and you should be
fully logged into your virtualmachine.

50. Keep waiting, and a dialog will appear that says "Information avialable" and
"Record your encryption passphrase" Click on: "Run this action now"

51. Type in the same password you used to log in. After that window closes,
click "Close" in the dialog box.

Congratulations! You have now set up a virtual machine as well as a firewall to
protect it. Now we need to finish configuring the primary virtual machine.

Next:12. Ubuntu Initial Setup ===
=== 12. Ubuntu Initial Setup ===

Ok, now that we have installed Ubuntu, we need to set it up so that we can use
it fully. This also means making sure we can see flash on websites such as

1. First, we have to install any updates that are pending. At the bottom of your
screen, you should notice where it says "Update Manager". Click on that.

2. Now, click on "Install Updates". If you did not see "Update Manager", then
skip these two steps.

3. Any time an administrative task is required, you will need to type in your
password. This is the same password you used to log in.

Now we wait, this is going to download any necessary security updates to make
certain we are using the most current/secure setup possible. This may require
downloading hundreds of megabytes. Just go ahead and let it do that, and when
everything is downloaded and updated, proceed to the next step. While you wait,
Ubuntu may go into screensaver mode. If so, just move the mouse and it will ask
you for your password. That will leave screensaver mode.

If the updates are more than a hundred megabytes, it will take quite a while. It
may take up to 2-3 hours depending on your computer and internet connection.
Nonetheless, this step is critical. Do not skip the updates. Besides ensuring
that your setup will be secure, the updates also ensure that all of the
applications are up to date and thus most likely to function correctly. Just go
ahead and watch a movie for a couple hours, and then return and check on it.

After all of the updates have been downloaded and installed, the "Update
Manager" window will now say "Your system is up-to-date" at the top. Further, it
will say: "The computer needs to restart to finish installing updates.". Go
ahead and press the 'X' in the top right corner of the window, and choose 'Send
the shutdown signal". If prompted, click "Shut Down". Once it has fully shut
down, the window will disappear and you will be back at the VirtualBox manager.
Go ahead and right click on "Primary" and click "Start". This will restart the
virtual machine.

If a virtual machine fails to shutdown after 10 minutes or so, then go ahead and
close the window again by pressing the 'X' but this time choose "Power down". If
it still will not shut down, then VirtualBox may have crashed. If so, just
follow these instructions:

( Follow the steps in this mini-section if a virtual machine fails to shutdown,
or you need to completely close/restart VirtualBox).

( First, press "Ctrl+Alt+Delete", and then click "Task Manager"). Next, locate
the process that is running that starts with "VirtualBox". Right click that
process, and click "End Process Tree"
(This should force the window to close).

(Now, restart VirtualBox by going to your start menu, All Programs, Oracle VM
VirtualBox VirtualBOx).

Now you will have the VirtualBox manager up again. To restart the Ubuntu
machine, simply right click on "Primary" and click "Start".

Once your Primary vm has rebooted, you will be again at the login screen. Here
as before, click on "mainuser" and then enter in your password. Now your primary
machine is fully up to date. Remember, be patient. It may take a few minutes
before your virtual machine has fully booted. First you will see the background
image and a mouse cursor that can move around, next you should hear the login
sound play, and finally you will see the menu at the top and bottom of your
virtual machine window. Depending on the speed of your computer, this may take
10 minutes or more. Just be patient. Don't worry if your virtual machine appears
to be running too slow, we will speed it up.

Now your Virtual Machine is set up and ready for use.

Next:13. Installing Guest Additions ===

=== 13. Installing Guest Additions ===

In order to ensure that the Virtual Machine runs smoothly as possible, we are
going to install some additional software to the virtual machine.

1. Go to the "Devices" menu at the top of your virtual machine main window
(Machine, Devices, Help), and go to "Install Guest Additions"

2. Go to the "Places" menu at the top of your virtual machine (Applications,
Places, System), and click on "VBOXADDITIONS_4.0.4_70112" (the number may be

3. At the top this new window will be the text "The media has been determined as
"UNIX software". Click on "Open Autorun Prompt"

4. A new dialog may appear saying "This medium contains software intended to be
automatically started. Would you like to run it?" Click "Run"

5. Enter your administrative password (the one you use to log into Ubuntu) and
click "Ok"

6. Now the VirtualBox Guest Additions installer will begin. This may take some
time, so just relax and wait. Depending on your computer, this may take 30
minutes or more.

7. When this is finished, you will see the text "Press Return to close this
window." Go ahead and do so.

8. Once that window has closed, go ahead and press the 'X' to close the entire
virtual machine window. Select "Send the shutdown signal" and click "Ok".

9. A dialog box will appear. Click on "Shut Down", the top most option.

At this stage it is a good idea to further optimise our virtual machine. When
you initially installed it, you most likely selected either 256 MB or 512 MB of
RAM. If you have enough RAM to spare, then I highly recommend you increase that
to at least 1 GB. Here is how to do so:

1. First, right click on "Primary, Powered off" and go to Settings.

2. Select "System" from the menu on the left.

3. Increase the "Base Memory" to either 1024 MB (1 GB), or some higher value you
are comfortable with.

It is also a good idea to increase the video memory available to the virtual

4. Select "Display" from the menu on the left, still inside of "Settings"

5. Increase the "Video Memory" slider to the right as far as you are comfortable
with. For example, 128 MB.

6. Check the box "Enable 3D Acceleration".

7. Now click "Ok" at the bottom.

Go ahead and start up Ubuntu again by right clicking "Primary, Powered off" and
clicking "Start"

When Ubuntu loads up, go ahead and log in as before using your password. Now
wait until Ubuntu is fully booted and the "Applications Places System" menu is

You will probably notice that your virtual machine loads up and runs faster than

How well your virtual machine runs depends on how good your computer is.
Primarily, RAM and processor speed are the most significant factors. If your
computer is modern enough, you should be able to use websites with flash and
even watch videos, such as on YouTube, with no problem. If your computer is not
as modern, you will still be able to browse websites but may not be able to
watch videos. You should still be able to use most flash based websites however.

*** IMPORTANT: Do NOT browse sensitive content YET. At this stage, your virtual
machine is not yet configured to use TOR. ***

Next:14. Installing IRC (Optional) ===

=== 14. Installing IRC (Optional) ===

*** This section is entirely optional. If you are not interested in installing
IRC, skip this section. ***

To install IRC on your new virtual machine, follow these steps:

1. Go to the "Applications" menu, and go to "Ubuntu Software Center"

2. Type "kvirc" in the search box field in the top right.

3. When the results return, select the one called: "KDE-based next generation
IRC client" or "KV Irc".

4. Click "Install"

5. Enter your password when prompted.

6. While it installs, you will notice a progress bar. This may take a few
minutes depending on the speed of your internet connection.

7. Once it is finished installing, the progress bar will go away. Go ahead and
close the "Ubuntu Software Center".

You are probably used to the close/ min/ max buttons being on the top right, as
is the case in Windows. You will find them in the top left instead. If you don't
like this, don't worry. You can change it later.

Now, let's go ahead and set up KVIrc.

Remember, you are NOT truly anonymous yet.

8. Click on "Applications" in the top menu.

9. Go to "Internet"

10. Click on "KVIrc"

11. "KVIrc Setup" will appear. Go ahead and click "Next" to begin.

12. "Store Configuration in Folder", click "Next"

13. "Please choose a Nickname". You can leave this exactly as is, or you can
choose a Nick name then click "Next".


Do NOT pick a nick name you have ever used before, or a nick name that can help
someone determine who you are. Also, do NOT fill in any other details such as
location, age, real name, etc. Leave everything else as is.

You are NOT Anonymous yet.

14. Now you are asked to pick a theme, select "No theme" then click "Next"

15. Now click "Finish" to leave the KVIrc Setup

16. A new window will appear having a list of servers, click "Close"

Now let's connect to the "Freenode" IRC network. By now, you may have many
questions about how to use Ubuntu. The #Ubuntu chatroom on Freenode is a great
place to start, and where you can ask questions related to how to use Ubuntu and
VirtualBox. Please remember, you are NOT anonymous yet and anything you say can
be matched to your IP address. Keep the conversation related to technical help,
or just learning Ubuntu.

Do NOT discuss TOR.
Do NOT discuss ANY sensitive material.

Remember, this chatroom consists mostly of people who have set up Ubuntu for
other reasons. Therefore, they will be able to help you configure it, and answer
many questions about how Ubuntu works.

17. At the bottom right of KVIrc is a long text input box. Click inside that

18. Type, exactly as shown below, including the "/" character:

/server irc.freenode.net 6667

19. This will connect you to the Freenode IRC network. After a few minutes, you
will be connected and a dialog box will appear.

20. Uncheck the box that says "Show this window after connecting", and then
click "Close"

21. Now, in the same text box as you typed the /server command, type the
following exactly as shown below, including the "/" and "#" characters:

/join #Ubuntu

22. Now you are in the #Ubuntu chatroom. Feel free to discuss the Ubuntu
operating system and ask questions related to how to use Ubuntu. Remember:

*** Do NOT discuss TOR or sensitive material. You are NOT anonymous. ***

This is a good opportunity for you to learn how to set up Ubuntu to be the way
you want as far as colors, layout, theme and so forth. When you have finished,
simply close the "KVIrc" window.

Next:15. Installing Torchat (optional) ===

=== 15. Installing Torchat (optional) ===

*** This section is entirely optional. If you are not interested in installing
Torchat, skip this section. ***

Torchat is a program you can use to communicate securely and anonymously with
other Torchat users. It is only useful if you already know someone who is using
it. If you do not know someone using Torchat, then it is best to skip this
section and come back to it in the future when you want to install Torchat.

These instructions work for Ubuntu 10.10.

First, installing Torchat is a bit tricky because Ubuntu does not include Tor by
default in its repositories. Tor is a requirement for torchat, and therefore we
have to first install Tor on Ubuntu. Doing so is not too difficult.

1. First, go to "Applications" -> "Accessories" -> "Terminal". You will see a
new window appear with a prompt that looks like this:


2. Now, type exactly as shown below, and hit enter:

sudo bash

3. After entering your password, you will be at a new prompt which looks like


4. Now, either type or copy-paste the below text into this window and then hit

echo "deb http://deb.torproject.org/torproject.org experimental-lucid main" |
sudo tee -a /etc/apt/sources.list
sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 886DDD89

5. After you do this, you should see the following at the bottom of your window:

gpg: Total number processed: 1
gpg: imported: 1 (RSA: 1)

6. Now, we should be able to install tor. In this same window, type the
following commands, one at a time:

apt-get update
apt-get install vidalia privoxy tor

7. (press Y and enter when prompted)

Now we need to obtain the Torchat installation file, follow these steps:

8. In firefox on Ubuntu, go to the following URL:

9. On the left under where it says "Downloads"

10. One of the files listed will end in .deb, for example torchat-0.9.9.deb.
Click on that file name.

11. On the next page, again click on the file name. This should begin the file

12. By default, Ubuntu wants to open this file using the "Ubuntu Software
Center". This is correct.

Now wait until the file finishes downloading, and then the "Ubuntu Software
Center" will appear. Follow these steps:

1. Press "Install"

2. Type in your password when prompted.

After a short wait, Torchat will be installed.

To start Torchat, go to "Applications" -> "Internet" -> "Torchat Instant

Next:16. Creating TOR-Only Internet Environment ===

=== 16. Creating TOR-Only Internet Environment ===

Up until now, we have been using our Virtual Machine to access the internet
directly. This was necessary so that we could install updates, software, and
get a feel for how to use Ubuntu.

Now it is time to force Ubuntu to connect to the internet using TOR Only. At the
end of this phase, your Ubuntu virtual machine will be usable as a secure and
anonymous TOR based browsing environment. It will be *impossible* for you to
access the internet except through TOR, and therefore you can rest assured that
anything at all you do online through the Ubuntu virtual machine will be through

First, we need to shut down any running virtual machines. If "Primary" is
running, click the 'X' in the top right to close it. Select "Send shutdown
and then select "Shut Down" when prompted. If "Firewall" is running, go ahead
and close it in the same way, but choose "Power off".

After a minute or so, you should be back to your VirtualBox Manager, with
neither virtual machine running.

1. Right click on "Primary, Powered Off" and go to "Settings"

2. Select "Network" from the menu on the left.

3. Next to "Attached to" is a pull down menu. Right now it is set to "NAT".
Choose "Internal Network" and click "Ok"

4. Click "Firewall" to highlight it, and then click on "Snapshots (1)" in the
top right.

5. Right click on "Snapshot 1" and then select "Restore Snapshot". Select
"Restore" if prompted.

6. Right click "Firewall" and click "Start"

Now your Firewall will be resumed exactly where it had been previously set up.
The last command entered should still be visible.

Before you proceed, make sure that TOR is running on your main Windows computer.
If it is, you will see an "Onion" icon visible in your task bar. Click on that
icon and you should see the "Vidalia Control Panel". Make sure that it says
"Connected to the TOR Network". If so, you are ready to proceed. If not then
please see section 2 : "Using and Testing Tor Browser for the first time" to
re-start TOR. Once TOR is running, proceed.

Let's restart Ubuntu:

7. Right click "Primary" and click Start. Log in as normal.

8. After fully logged in, open "Firefox" by clicking the orange "Firefox" logo
at the top, next to "System".

9. Try to go to any website, such as http://www.google.com. Try at least 3-5
different websites. You should not be able to connect to any of them.

Note: If you attempt to go to websites you have already been to using Ubuntu,
they may appear to load because they are cached.

10. In Firefox on Ubuntu, go to "Edit" and "Preferences"

11. Click on the "Advanced" icon

12. Click on the "Network" tab

13. Under "Connection" it says "Configure how Firefox connects to the internet".
To the right of that is a "Settings" button. Click that button.

14. Select "Manual proxy configuration"

15. Next to both "HTTP Proxy" and "SSL Proxy" type in:

16. Set the port to 8118 for both "HTTP Proxy" and "SSL Proxy"

17. Next to "SOCKS Host" type:

18. Set the port for "SOCKS Host" to 9050

19. Make sure that "SOCKS v5" is selected at the bottom.

20. Click "Ok" and then "Close"

Now we have instructed Firefox to use TOR. However, Firefox cannot use TOR yet.
Right now, Ubuntu is completely unable to connect to the Internet. We
are going to change that.

21. Go to "Applications" -> "Accessories" -> "Terminal"

22. Type in: sudo bash (and hit enter)

23. Type in your password if prompted.

24. Type in the following commands exactly as shown below (or copy paste them):

ifconfig eth0
/etc/init.d/polipo stop
/etc/init.d/tor stop
/etc/init.d/privoxy stop

(Note: the last three commands, those beginning with /etc/ are only necessary if
you installed Torchat)

Now you have told your Ubuntu machine to join the same network that your
Firewall is on. Now we can establish a tunnel for TOR data to flow from our
Ubuntu machine, through the Firewall, into your Windows guest machine. We need
to establish two such tunnels.

The first tunnel for port 9050 data, and the second tunnel for port 8118 data.
When these two tunnels are set up, it will be possible for you to use your
Ubuntu machine to access any website using TOR. Further, it is still completely
impossible for your Ubuntu machine to access the Internet in any other way.

25. Your terminal window should still be open. Type in the following command
exactly as shown (or copy paste it):

ssh -N -L 9050: root@

26. Type "yes" if prompted. When prompted for the password, give your Firewall
password. Not your Ubuntu password.

After you hit enter, you will see the cursor go to a blank line and nothing else
happens. This simply means the connection you requested is active. If the
connection were to stop for any reason, you would return to a command prompt. If
you want to terminate the connection yourself, simply hit CTRL+C. You can type
in the same ssh command again if you need to re-open the tunnel.

27. Now we are going to open the second tunnel. In your terminal window, go to
"File" and "Open Tab". This will open up a tab for a second terminal without
affecting the first.

28. Now, type exactly as shown below to open the second tunnel:

ssh -N -L 8118: root@

29. Return to Firefox. Go to the "File" menu and uncheck "Work Offline" if it is

30. Go to the URL: http://check.torproject.org

If you see the text: "Congratulations. Your browser is configured to use Tor"
then you are all set! Your Ubuntu virtual machine is now NOT connected to the
internet in any way. However, you can browse any website using TOR, even
Youtube. You do not have to be afraid of javascript or Flash. Any files you save
onto your virtual machine will automatically be saved in the encrypted truecrypt
volume you set up earlier. In fact, everything the virtual machine does will be
contained within that truecrypt volume.

Further, even if someone somehow managed to remotely gain full root access to
your Ubuntu machine (absurdly unlikely to happen), they would still not be able
to see *anything* about who you are, or what your real IP address is, or even
that you are using a Virtual Machine. To them, it would appear that the Ubuntu
machine is your main computer. They would be totally unable to compromise your
identity based on this alone.

However, keep the following in mind. If someone were to gain access to your
Ubuntu machine, they WOULD be able to see anything you have used it for or any
files you have saved. Therefore, I recommend for the sake of absolute security,
do not store anything on your Ubuntu virtual machine that identifies you. This
is just a precaution. It is virtually impossible that someone would manage to
remotely gain access to your Ubuntu machine.

Next:17. General Daily Usage ===

=== 17. General Daily Usage ===

Much of this guide has involved detailed one-time setup processes. From now on,
all you have to do when you want to use TOR from your Ubuntu virtual machine is
to follow these steps. Every step listed is a step you have already done, so
feel free to re-visit earlier sections if you need help.

1. Start TrueCrypt, and mount your hidden volume which contains your virtual

2. Start VirtualBox

3. Start TorBrowser Bundle.

4. Click "Firewall" to highlight it, and then click on "Snapshots (1)" in the
top right.

5. Right click on "Snapshot 1" and then select "Restore Snapshot". Select
"Restore" if prompted.

6. Right click "Firewall" and click "Start"

7. Right click "Primary" and click Start. Log in as normal.

8. Go to "Applications" -> "Accessories" -> "Terminal"

9. Type in: sudo bash (and hit enter)

10. Type in your password if prompted.

11. Type in the following commands exactly as shown below (or copy paste them):

ifconfig eth0
/etc/init.d/polipo stop
/etc/init.d/tor stop
/etc/init.d/privoxy stop

(Note: the last three commands, those beginning with /etc/ are only necessary if
you installed Torchat)

12. Your terminal window should still be open. Type in the following command
exactly as shown (or copy paste it):

ssh -N -L 9050: root@

13. Type "yes" if prompted. When prompted for the password, give your Firewall
password. Not your Ubuntu password.

14. In your terminal window, go to "File" and "Open Tab".

15. Now, type exactly as shown below to open the second tunnel:

ssh -N -L 8118: root@

16. Return to Firefox. Go to the "File" menu and uncheck "Work Offline" if it is

17. Go to the URL: http://check.torproject.org

If you see the text: "Congratulations. Your browser is configured to use Tor"
then you are all set!


Phew, now i have it complete ! I admit its quite extensive, not to say
enourmous, but its the best how-to on anonymity and other safety procedures i
have found so far. It secures your sys black-hat style^^ :

http://en.wikipedia.org/wiki/Black_Hat_Briefings (for those of you who dont know
black hat ^^)

You dont have to do all steps at once. You can do a little of it every time you
have an hour or two to spare. I think for the whole procedure you will need
roughly 8-12 hours. I think its written in a way everybody should be able to
follow. If there are still steps unclear just ask, i will see if i can help you.
btw this is written for noobs, but the tips here are interesting for allmost

P.S.: Once you have installed TOR you can get access to TOR hidden services and
other interesting deep-web pages. If you want some links for your first steps
into this hidden part of the internet just ask me. If there is a lot of requests
i will write an extra thread with the most important websites in the deepweb.
One thing before you get started : most deepweb pages arent online 24/7. So if
you cant reach a certain website be patient and try again and again till you get
access. Another thing : you will find websites that are pretty shocking and
disturbing. In 99.5% you will see beforehand what you find on those sites, so if
you dont want to see certain things dont klick on the links.

Now that you have a really secure system, you should know what to do when the
shit hits the fan and you are arrested or your home gets searched. SYour system,
is secured in a way they cant break, so the only thing that can incriminate you
now is your testimony.
These 2 youtube videos are 2 lectures on behaviour towards the police in such
situations. Part one is done by a criminal defense attorney, part 2 by a very
experienced police officer. They both tell you about the tricks the police uses
and how you should react :



;tl,dw : say nothing and ask for a lawyer, ALLWAYS ! You cannot improve your
situation with anything you say (this is counterintuitive, but the attorney here
has in his whole carrer NEVER heared of single case where a suspect could help
his case by talking to the police, but he could name many cases where they made
matters way worse) but you can make it a lot worse, so shut the hell up and wait
for your lawyer.

Even him being a defense lawyer wouldnt talk to the police under any
circumstances. You can tell your story before court AND NEVER, UNDER NO
CIRCUMSTANCES, BEFORE THAT ! Even the cop in lecture 2 says NEVER TALK TO THE
POLICE !!!!!



Share by MasterPirate™ ✔